SW-ALL
SW-PG-06
SW-MG-400001280
OG-SW-LOC609-250
A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" diametral clearance | |
Adds up to 3,000 psi holding power | |
Recommended for parts that will need subsequent dismantling, i.e., retention of bearings onto shafts and into housings |
HOUSING BASE TYPE | Adds up to 3,000 psi holding power |
INNER RING WIDTH | http://msdstds.henkel-cnwww1.avenit.com.cn/documents/msds-tds/AU/MSDS/en/LOCTITE_609.pdf |
LOCKING DEVICE | Recommended for parts that will need subsequent dismantling, i.e., retention of bearings onto shafts and into housings |
UnitOfMeasure | each |
BaseOUM | each |
CENTRE HEIGHT UOM | A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" diametral clearance |
GRIT | ml |
Brand | Loctite |
A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" diametral clearance | |
Adds up to 3,000 psi holding power | |
Recommended for parts that will need subsequent dismantling, i.e., retention of bearings onto shafts and into housings |
HOUSING BASE TYPE | Adds up to 3,000 psi holding power |
INNER RING WIDTH | http://msdstds.henkel-cnwww1.avenit.com.cn/documents/msds-tds/AU/MSDS/en/LOCTITE_609.pdf |
LOCKING DEVICE | Recommended for parts that will need subsequent dismantling, i.e., retention of bearings onto shafts and into housings |
UnitOfMeasure | each |
BaseOUM | each |
CENTRE HEIGHT UOM | A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" diametral clearance |
GRIT | ml |
Brand | Loctite |