You browser has Javascript turned off! This site will not function without Javascript! Enabling Javscript Instructions

Feedback

** 51845 LOC GSKT ELIMINATOR 518 300ML - LOC518-300

** 51845 LOC GSKT ELIMINATOR 518 300ML

Code: LOC518-300

Loctite

Stock

** 51845 LOC GSKT ELIMINATOR 518 300ML

$421.80

$293.42

per each

(GST FREE)

$421.80

Features
Specifications

	Cures when confined between rigid metal parts e.g. cast iron components and pump housings
	Provides resistance to low pressures immediately
	Recommended for use on rigid iron, steel and aluminum flanges e.g. aluminum gearbox and engine castings, etc
	Easy disassembly and cleaning
	Forms a flexible, solvent-resistant seal that will not tear or decay
	Seals to 300 °F and fills gaps to 0.50"
	It can be used on flexible metal assemblies, including aluminum surfaces

HOUSING BASE TYPE	Recommended for use on rigid iron, steel and aluminum flanges e.g. aluminum gearbox and engine castings, etc
INNER RING WIDTH	http://msdstds.henkel-cnwww1.avenit.com.cn/documents/msds-tds/AU/MSDS/en/LOCTITE_518.pdf
LOCKING DEVICE	Easy disassembly and cleaning
QUANTITY OF BOLT HOLES	Seals to 300 °F and fills gaps to 0.50"
UnitOfMeasure	each
BaseOUM	each
CENTRE HEIGHT UOM	It has better cure on contaminated surfaces, increased flexibility and adhesion and improved cure on inactive metals such as aluminum
DangerousGoodsProfile	001
GRIT	ml
Brand	Loctite

Features

	Cures when confined between rigid metal parts e.g. cast iron components and pump housings
	Provides resistance to low pressures immediately
	Recommended for use on rigid iron, steel and aluminum flanges e.g. aluminum gearbox and engine castings, etc
	Easy disassembly and cleaning
	Forms a flexible, solvent-resistant seal that will not tear or decay
	Seals to 300 °F and fills gaps to 0.50"
	It can be used on flexible metal assemblies, including aluminum surfaces

Specifications

HOUSING BASE TYPE	Recommended for use on rigid iron, steel and aluminum flanges e.g. aluminum gearbox and engine castings, etc
INNER RING WIDTH	http://msdstds.henkel-cnwww1.avenit.com.cn/documents/msds-tds/AU/MSDS/en/LOCTITE_518.pdf
LOCKING DEVICE	Easy disassembly and cleaning
QUANTITY OF BOLT HOLES	Seals to 300 °F and fills gaps to 0.50"
UnitOfMeasure	each
BaseOUM	each
CENTRE HEIGHT UOM	It has better cure on contaminated surfaces, increased flexibility and adhesion and improved cure on inactive metals such as aluminum
DangerousGoodsProfile	001
GRIT	ml
Brand	Loctite

loading...